Explosion Proof Walk in Coolers
American Walk in Coolers specializes in the manufacture of class 1 division 2 explosion proof walk in coolers. We have been building these specially designed cold chambers for the Government, private labs and chemical companies for over 25 years. These explosion proof walk in coolers will provide rapid cool down of volatile / flammable substances.
American Walk in Coolers also offers complete install of all explosion proof walk in coolers. With our team of certified installers, we can meet at your location and perform the installation for you. This insures that your new class 1 division 2 walk in coolers are installed correctly and that all startup procedures are performed by our qualified technicians.
For more information about AWIC products, or to speak with one of our design specialist, please call.
A location (1) in which volatile flammable liquids or flammable gases are handled, processed or used, but in which the liquids, vapors or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems, or in case of abnormal operation of equipment; or (2) in which ignitable concentrations of gases or vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment; or (3) that is adjacent to a Class I Division 1 location, and to which ignitable concentrations of gases or vapors might occasionally be communicated unless such communication is prevented by adequate positive–pressure ventilation from a source of clean air and effective safeguards against ventilation failure are provided. [See Section 500–4(b) of NFPA 70, National Electrical Code.]
A location in which (1) combustible dust will not normally be in suspension in the air in quantities sufficient to produce explosive or ignitable mixtures and dust accumulations are normally insufficient to interfere with the normal operation of electrical equipment or other apparatus; or (2) dust may be in suspension in the air as a result of infrequent malfunctioning of handling or processing equipment and dust accumulations resulting there from may be ignitable by abnormal operation or failure of electrical equipment or other apparatus. [See Section 500–5 (b) of NFPA 70, National Electrical Code.]